Rexroth M-2SEW6P3X/420MG24N9K4 THROTTLE VALVE

Fatigue limit load, Cu:0.72 kN; Radial clearance class:C4; Characteristic cage frequency, FTF:0.38 Hz; d:30 mm; Mass:0.35 kg; Dynamic load, C:27.9 kN; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:4.95 Hz; Max operating temperature, Tmax:120 °C; d1:42.4 mm;

Ball Material:440 STAINLESS STEEL; Brand:Baldor-Dodge; Bearing Locking Device:Setscrew; Ball Grade:Class 10; Max Bearing Speed:4500 rpm; Bearing Duty:Normal Duty; Shaft Attachment (2):Set Screw; Retainer Material:Polymer; Ring Size:Standard; Bearing Insert Material:Stainless Steel;

Bearing ring (inner ring) WS:WS81214; Bearing ring (outer ring) GS mass:0.3 kg; ras max:1 mm; Nlim (grease):730 rpm; Characteristic inner ring frequency, BPFI:8.5 Hz; da min:98 mm; C0a:410 kN; Dw:11 mm; Dc1:70 mm; Manufacturer Name:NTN;

N:18mm; A:60 mm; H1:25 mm; Designation of bearing:UC212-39G2; C0:32.8 kN; d:61.91 mm; Designation of housing:PE212N-; A1:42 mm; L1:71 mm; Z:31.5 mm;

B:51.6 mm; Z:76 mm; T min.:-20 °C; Weight:3.04 kg; Designation of bearing:UC210-31G2; A1:39 mm; C:35.1 kN; d:49.21 mm; N:20mm; N1:25 mm;

A2:45.9 mm; s1:30.9 mm; d1:37.4 mm; B:34.8 mm; N:11,5mm; Designation of bearing:EX205G2T04; T min.:-40 °C; d:25 mm; Z:50.6 mm; L:70 mm;

L:140 mm; H1:16 mm; T min.:-20 °C; Z:17.2 mm; G:M6x1; A:38 mm; d:25 mm; N:13mm; Recommended tightening torque for set screw:5.5 Nm; T max.:200 °C;

Dz:70 mm; Designation of housing:PA206N-; H:42.9 mm; H1:13 mm; s1:20.5 mm; Designation of bearing:UK206G2H; C:19.5 kN; L:94 mm; Designation of open end cover:SCO206-25; Designation of closed end cover:SCC206;

A:60 mm; C0:32.8 kN; A1:42 mm; Recommended tightening torque for set screw:16.8 Nm; H2:140 mm; Designation of bearing:UC212-36G2T04; T max.:100 °C; L1:32 mm; H:69.9 mm; H1:16 mm;

T max.:200 °C; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; C:31.85 kN; A:38 mm; e:22 mm; C0:20.8 kN; S:10.2 mm; d:45 mm; s1:20.6 mm;

G:M10x1; J:380 mm; C0:140 kN; A1:81 mm; Recommended tightening torque for set screw:75 Nm; H1:50 mm; A:120 mm; Weight:37.9 kg; L:490 mm; T min.:-40 °C;

B:43.5 mm; Z:59.3 mm; T min.:-20 °C; Weight:2.6 kg; T max.:200 °C; J:111 mm; Designation of closed end cover:SCC210; Designation of bearing:US210-31G2T20; A2:54.6 mm; N:16mm;

Characteristic outer ring frequency, BPF0:3.59 Hz; Mass:0.07 kg; Min operating temperature, Tmin:-25 °C; Nlim (grease):18,000 rpm; D:42 mm; f0:13.9; d:20 mm; ra max:0.6 mm; Da max:38 mm; da max:26 mm;

da max:43 mm; Dynamic load, C:26.7 kN; D:72 mm; Radial clearance class:C3; f0:13.3; Characteristic cage frequency, FTF:0.39 Hz; Min operating temperature, Tmin:-25 °C; Noun:Bearing; Bore:1.181 Inch | 30 Mill;

Brand:Baldor-Dodge; Housing Material:Cast Iron; Bearing Locking Device:Setscrew; Housing Coating:Powder Coat; Ball Material:Steel; Expansion Type:Non-Expansion; Bearing Outer Ring Material:Steel; Anti-Rotation Pin:Yes; Bearing Series:207 Series; Seal Type:Single Lip;